Hand Tools & Jigs
52 Products
Chisel, High Impact, Size 6-50 Mm, Irwin
• High quality steel for improved sharpness and edge retention• Blade hardened and tempered for long chisel life• Forged one piece b...
£14.78View details
Clamp, Adjustable, All Steel, Gz, Bessey
• Hardened and tempered, very easy to use and lighter than casted clamps• Colour may vary on the clamp from red to yellow PDF Catalogue...
£24.58View details
Clamp, Adjustable, Tg, Bessey
From £16.81Clamp, Adjustable, Tg, Bessey
• With profiled steel rails and tempered cast tensioning arms• Colour may vary on the clamp from red to yellow PDF Catalogue Page
£16.81View details
Countersunk Bit With Plastic Handle
From £14.34Countersunk Bit With Plastic Handle
For use with woodTool steel, with plastic handlePack size1 pieceOnline Catalogue
£14.34View details
Dbb Mortice Jig And Fittings, Screw-On Shaft
Screw on shaft designSteel298 mm long shaftDepth of mortice cut: 180 mmOrder referenceJigs, cutters and accessories to be ordered separatelyPack size1...
£23.51View details
Dbb Mortice Jig And Fittings, Upgrade Kit
For upgrading the DBB mortice jig from the old snap-on cutters to the new screw-on versionSupplied with1x Standard screw-on shaft: 220 mm length (for ...
£69.31View details
Dbb Mortice Jig And Fittinrgs, Replacement Spare Depth Stop
Area of applicationFor restricting the drilling depth, for standard and long shaftsOrder referenceJigs, cutters and accessories must be ordered separa...
£6.94View details
Depth Gauge For Unitool Drilling Jigs
From £45.22Depth Gauge For Unitool Drilling Jigs
For drill bits with 10 mm diameter shank and bit diameter up to max. 20 mmSuitable for Unitool Minifix 12 and 15 drilling jigSuitable for drill bit 12...
£45.22View details
Drill Guide, Hafele Red Jig, For 35mm Diameter Concealed Hinges
Hinge drill guide for Häfele Red Jig 001.25.600 (see Related Products below)Red anodized aluminiumPack size1 pieceInstallation InstructionsOnline Cata...
£57.52View details
Drill Insert, For Unitool Multi Drilling Jig
For use with Unitool Multi drilling jig 001.25.000 (see Related Products below)For edge and panel drilling25 years Hafele Lifetime GuaranteeOnline Cat...
£19.33View details
Drilling Depth Stop
From £64.65Drilling Depth Stop
• For drill bits with Ø 10 mm shank and maximum drilling Ø 35 mm• The stop will not continue to turn when it comes into contact ...
£64.65View details
Drilling Jig 500, For Standard 48/9 Pattern Hinges, Grass
For drilling holes for hinges with either screw fixing or pre-mounted euro screwsFor drilling pattern 48/9Supplied with Template for wing mounting pla...
£247.96View details
Drilling Jig For Free Flap 1.7 & Free Flap 3.15 Lift Up Flap Stays
Free Flap Drilling JigFor Free Flap stay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centering...
£18.57View details
Drilling Jig For Free Flap Stays, For Front Panels
Free Front Panel Hinge Drilling JigFor all Free flap stay fittingsAcrylic glass with hardened steel insertsPack size1 piecePlease order 3mm & 5mm ...
£56.13View details
Drilling Jig For Free Fold Lift Up Flap Stays
Free Flap Drilling JigFor Free Fold stay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centering...
£35.47View details
Drilling Jig For Free Swing Lift Up Flap Stays
Free Swing Drilling JigFor Free Swing stay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centeri...
£36.24View details
Drilling Jig For Free Up Lift Up Flap Stays
Free Up Drilling JigFor Free Upstay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centering dril...
£36.24View details
Drilling Jig For Hafele Free Space Lift Up Flap Stays
Free Space Drilling JigFor Free Space stay flap systemsFor pilot drilling the cabinet side panels and flap front panelPlastic, with steel drilling sle...
£15.73View details
Drilling Jig For Senso And Free Fold Connecting Hinges
Senso & Free Fold Hinge Drilling JigFor drilling screw holes for connecting hinges for Senso and Free Fold flap fittingAcrylic glass with hardened...
£23.17View details
Drilling Jig, For Handles And Knobs, Height Adjustable, Imperial And Metric Scales
V-notch in fence for use in installing handles at a 45 degree angle Imperial and metric scales for use on all handlesHeight adjustment to the centre o...
£71.46View details
Drilling Jig, Variantool-N, Hafele Ixconnect
The jig allows for an inset distance from the front carcase edge of 37 mm and from the back edge of 69 mmIntegral sliding positioning tabs ensure cons...
£201.00View details
Driver Bit, Torsion, Pozi
From £14.91Driver Bit, Torsion, Pozi
• PZ steel torsion bit, 1/4”, 50 mm long• Torsion bits have a prolonged life span, improved grip, are less likely to break and requi...
£14.91View details
Hacksaw Blades, Bi-Metal, Irwin
From £6.86Hacksaw Blades, Bi-Metal, Irwin
• Weldtec technology innovative tooth geometry withstands wear and keeps the blade sharp for a long time• Bi-metal construction prevents t...
£6.86View details
Hafele Red Jig Basic Set
From £336.22Hafele Red Jig Basic Set
Exact, dimensionally accurate drilling with the new depth gauge systemInterchangeable drill guides allow quick drilling pattern changesCoordinated wit...
£336.22View details
Hand Saw, Fine, Irwin 990
From £14.96Hand Saw, Fine, Irwin 990
• Patented tooth grind• Double ground• 7 teeth per 25 mm PDF Catalogue Page
£14.96View details
Hand Saw, Universal, Irwin 880
From £14.92Hand Saw, Universal, Irwin 880
• Patented tooth grind• Triple ground• 8 teeth per 25 mm PDF Catalogue Page
£14.92View details
Hex Key, Galvanized Steel
From £6.92
Hex Key, Sw4, Z Shaped
From £13.72Hex Key, Sw4, Z Shaped
Zinc plated finish?Colour/finish:-zinc platedLength:-50 mmWidth:-20 mmMaterial:-Steel ? ? ?Sold in 100's? ?
£13.72View details
Insert, For Hafele Red Jig, 5/8/10/11 Mm Hole Diameter
Drilling jig for all furniture connectors and the most popular furniture fittings from Hafele exact, dimensionally accurate drilling with the new dept...
£7.44View details
Installation Template For Hes3d- E190 Hinge Range
Door and Frame Templates for installing the Sugatsune HES3D-E190 range of hingesMaterial: Methacrylic Resin (PMMA) Colour: ClearSee Hinges that are su...
£35.20View details
Jig, For 360-720 Mm & 400-940 Mm Worktops
For right and left standard 90 and 45 degree jointsFor right and left 90 degree joints where walls are up to 1.5 degree out of square (28 mm over 1 m ...
£83.77View details
Jig, For Belfast Sinks
From £81.16Jig, For Belfast Sinks
For routing 530 x 430 mm apertures for Belfast sinksFitting instructions includedCraft papers bound with phenolic resin and laminated with a melamine ...
£81.16View details
Jig, For Door Handles
From £11.61Jig, For Door Handles
Simple jig which accurately marks out door and drawer fronts in preparation for fixing handles and knobsPlasticGreen/black (colour may vary)How to use...
£11.61View details
Jig, For Grass Mounting Plates And Hinges ( Pack Of 10 )
For overlay installation onlyReversibleFor all Grass click on overlay hinges and mounting platesBlack plasticPack size10 piecesOnline Catalogue
£3.89View details
Jig, For Routing Sloping Drainer
From £81.90Jig, For Routing Sloping Drainer
For routing sloping drainage grooves in a natural wood or stone worktopEliminates the need for measuring - just line up the jig on the worktop and cla...
£81.90View details
Jig, For Sink And Hob Apertures
From £81.75Jig, For Sink And Hob Apertures
For routing apertures for sinks and hobsIncludes: Left and right hand radius curves at 100, 80, 60 and 40 mm, left and right hand 90 degree angles, st...
£81.75View details
Jig, Mortice, Jig1/R100, For Use With Concealed Door Closers, Locks And Fittings Up To 180 Mm Deep
For use when installing Perko Powermatic concealed hydraulic door closerSelf-centring mortice jig with precision cutters complete with plastic carry c...
£142.68View details
Jig, Routing Set For Soss Hinges
From £619.45Jig, Routing Set For Soss Hinges
• To suit 76 mm thick doors• Comprises universal base plate and set of slot-in templates packed in a carry case• Cabinet set compris...
£619.45View details
Level, Box Beam, Stanley Fatmax
From £97.05Level, Box Beam, Stanley Fatmax
• Solid acrylic block vials provide accuracy in eight orientations of +/-0.5mm/m• Vials magnified by 20% for improved all round visibility...
£97.05View details
Measuring Tape, 5 & 8 M, Stanley
From £7.23Measuring Tape, 5 & 8 M, Stanley
• 5 m/16 ft and 8 m/26 ft lengths, 19 mm (5 m tape) and 25 mm wide (8 m tape), metric and imperial reading• Class II accuracy• Forwa...
£7.23View details
Mounting Plate Jig, For Drilling Jig 500
Spare mounting plate jig for Drilling Jig 500 001.33.400 (see Related Products below)Black plasticPack size1 pieceOnline Catalogue
£30.99View details
Red Jig Depth Gauge, With Spring And Depth Stop, For 3.0-40.0 Mm Diameter Drill Bits
Drilling jig for all furniture connectors and the most popular furniture fittings from Hafele exact, dimensionally accurate drilling with the new dept...
£54.74View details
Red Jig Spare Parts, Basic Jig
From £227.18Red Jig Spare Parts, Basic Jig
With lasered scale for aligning the insert platesExact, dimensionally accurate drilling with the depth gauge systemInterchangeable drill guides allow ...
£227.18View details
Red Jig Spare Parts, Drill Bit, For 3.0/5.0/8.0/10.0 Mm Diameter Drill Bits
For Red Jig drilling jig 001.25.600 (see Related Products below)For use with depth gauge 158.0 mm shaft diameter130.00 mm total length1/4" hexagon chu...
£52.30View details
Red Jig, Multi-Spur Drill Bit, Hm, For Depth Gauge 32 And 48
For Basic Hafele Red Jig 001.25.600 (see Related Products below)Drilling jig for all furniture connectors and the most popular furniture fittings from...
£37.33View details
Replacement Pegs For Worktop Jig ( Pack Of 4 )
For use with worktop jig 002.13.565/566 (see Related Products below)Set comprises 4 black plastic pegsPack size1 pack (4 pegs)Online Catalogue
£3.41View details
Router Cutter, 1/2" Shank Router Bit 12.7mmd Tungst. Tip
• Straight, two flute• Shaft Ø: 1/2" / 12.7 mm• Tungsten carbide tipped PDF Catalogue Page
£30.63View details
Silverline Combination Spanners Various Lengths 6mm - 32mm
SILVERLINE Combination Spanners Various Lengths 6mm - 32mmThin profile, mirror polished, drop-forged, hardened and tempered chrome vanadium.6mm - 32mm...
£1.35View details
Unitool Multi Drilling Jig , Ixconnect
From £140.30Unitool Multi Drilling Jig , Ixconnect
For the carcase connector ranges Minifix 12 and 15, Rafix, Pushfix, Onefix, Slimfix, Tab 18, cuphinges (26 and 35 mm diameter) and mounting plates wit...
£140.30View details
Utility Blades, 2 Notches, 92 Style, Steel ( Pack Of 100 )
2 notches, 92 styleLong lastingFits most standard utility knivesSuitable for cutting packagingSteelYou must be 18 years old or over to buy this bladed...
£28.48View details
Variantool Drilling Jig Depth Gauge With Multi Spur Drill Bit, 5/8/10 Mm
Depth gauge with drill bit suitable for Hafele Red Jig drilling jig Variantool dig for series drilled holesDrill bits are pre-set to drilling depth 13...
£82.50View details
Vernier Gauge, Up To 157 Mm
From £40.01Vernier Gauge, Up To 157 Mm
Measures to 157 mmMatt chrome plated steelSupplied in a black plastic casePack size1 pieceOnline Catalogue
£40.01View details
