• Galvanized steel

Screw on shaft designSteel298 mm long shaftDepth of mortice cut: 180 mmOrder referenceJigs, cutters and accessories to be ordered separatelyPack size1...

For routing 530 x 430 mm apertures for Belfast sinksFitting instructions includedCraft papers bound with phenolic resin and laminated with a melamine ...

Free Flap Drilling JigFor Free Flap stay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centering...

V-notch in fence for use in installing handles at a 45 degree angle Imperial and metric scales for use on all handlesHeight adjustment to the centre o...

Depth gauge with drill bit suitable for Hafele Red Jig drilling jig Variantool dig for series drilled holesDrill bits are pre-set to drilling depth 13...

The jig allows for an inset distance from the front carcase edge of 37 mm and from the back edge of 69 mmIntegral sliding positioning tabs ensure cons...

For the carcase connector ranges Minifix 12 and 15, Rafix, Pushfix, Onefix, Slimfix, Tab 18, cuphinges (26 and 35 mm diameter) and mounting plates wit...

For right and left standard 90 and 45 degree jointsFor right and left 90 degree joints where walls are up to 1.5 degree out of square (28 mm over 1 m ...

Drilling jig for all furniture connectors and the most popular furniture fittings from Hafele exact, dimensionally accurate drilling with the new dept...

With lasered scale for aligning the insert platesExact, dimensionally accurate drilling with the depth gauge systemInterchangeable drill guides allow ...

SILVERLINE Combination Spanners Various Lengths 6mm - 32mmThin profile, mirror polished, drop-forged, hardened and tempered chrome vanadium.6mm - 32mm...

Area of applicationFor restricting the drilling depth, for standard and long shaftsOrder referenceJigs, cutters and accessories must be ordered separa...

• With profiled steel rails and tempered cast tensioning arms• Colour may vary on the clamp from red to yellowPDF Catalogue Page

Free Up Drilling JigFor Free Upstay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centering dril...

Hinge drill guide for Hafele Red Jig 001.25.600 (see Related Products below)Red anodized aluminiumPack size1 pieceInstallation InstructionsOnline Cata...

For routing apertures for sinks and hobsIncludes: Left and right hand radius curves at 100, 80, 60 and 40 mm, left and right hand 90 degree angles, st...

For routing sloping drainage grooves in a natural wood or stone worktopEliminates the need for measuring - just line up the jig on the worktop and cla...

Measures to 157 mmMatt chrome plated steelSupplied in a black plastic casePack size1 pieceOnline Catalogue