• Patented tooth grind• Triple ground• 8 teeth per 25 mm PDF Catalogue Page

• Straight, two flute• Shaft Ø: 1/2" / 12.7 mm• Tungsten carbide tipped PDF Catalogue Page

For Red Jig drilling jig 001.25.600 (see Related Products below)For use with depth gauge 158.0 mm shaft diameter130.00 mm total length1/4" hexagon chu...

• PZ steel torsion bit, 1/4”, 50 mm long• Torsion bits have a prolonged life span, improved grip, are less likely to break and requi...

Hinge drill guide for Hafele Red Jig 001.25.600 (see Related Products below)Red anodized aluminiumPack size1 pieceInstallation InstructionsOnline Cata...

For upgrading the DBB mortice jig from the old snap-on cutters to the new screw-on versionSupplied with1x Standard screw-on shaft: 220 mm length (for ...

• Patented tooth grind• Double ground• 7 teeth per 25 mm PDF Catalogue Page

Screw on shaft designSteel298 mm long shaftDepth of mortice cut: 180 mmOrder referenceJigs, cutters and accessories to be ordered separatelyPack size1...

For drilling holes for hinges with either screw fixing or pre-mounted euro screwsFor drilling pattern 48/9Supplied with Template for wing mounting pla...

For right and left standard 90 and 45 degree jointsFor right and left 90 degree joints where walls are up to 1.5 degree out of square (28 mm over 1 m ...

Depth gauge with drill bit suitable for Hafele Red Jig drilling jig Variantool dig for series drilled holesDrill bits are pre-set to drilling depth 13...

Measures to 157 mmMatt chrome plated steelSupplied in a black plastic casePack size1 pieceOnline Catalogue

Free Swing Drilling JigFor Free Swing stay flap systemsAcrylic glass with hardened steel insertsPack size1 piecePlease order 5mm diameter self centeri...

For use with worktop jig 002.13.565/566 (see Related Products below)Set comprises 4 black plastic pegsPack size1 pack (4 pegs)Online Catalogue

For Basic Hafele Red Jig 001.25.600 (see Related Products below)Drilling jig for all furniture connectors and the most popular furniture fittings from...

Exact, dimensionally accurate drilling with the new depth gauge systemInterchangeable drill guides allow quick drilling pattern changesCoordinated wit...

• Galvanized steel

For the carcase connector ranges Minifix 12 and 15, Rafix, Pushfix, Onefix, Slimfix, Tab 18, cuphinges (26 and 35 mm diameter) and mounting plates wit...

• With profiled steel rails and tempered cast tensioning arms• Colour may vary on the clamp from red to yellowPDF Catalogue Page