• Round spigot• UV stabilised material PDF Catalogue Page

Over 199.35 cm2 ventilation areaFor recess mountingSuitable for wood thicknesses 10-20 mmTo install, the grille is simply inserted into the pre-cut ap...

• Round spigot• UV stabilised material PDF Catalogue Page

• For recess mounting• Press fitting• PlasticPDF Catalogue Page

• White flame retardant material• Please see Related Products PDF Catalogue Page

• Flame retardant white material PDF Catalogue Page

• For recess mounting• Press fitting• Long front edges bevelled• With 30 x 6 mm oval slots arranged in parallel• Silver ...

Wall vent with non-return flap and wind cowlRecommended for exposed locationsWill connect to round pipe, threaded hose coupler and round to flat conve...

• For recess mounting• Screw fixing• Long front edges bevelled• With 87 x 9 mm rectangular slots arranged in parallel• Complies with the requirements ...

• To be connected outside of hose• Flame retardant white material• N.B. System 4 = Ø 100 mm System 5 = Ø 125 mm PDF Cat...

- For recess mounting- Press fitting- PlasticPDF Catalogue Page

• Round spigot• UV stabilised material PDF Catalogue Page

• White ducting kit with either white or brown external grille• Please note:- System 4 = approx. Ø 100 mm- System 4a = W110 x H54 mm ...

- Vent height x width external dimensions; see table below- Connector depth: 145 mm- Stainless steelPDF Catalogue Page

- For fitting into top of plinths- 367 mm length x 79 mm height x 21 mm depth- For 16 mm board thickness- PlasticPDF Catalogue Page

• Can be concealed behind cornice, in ceiling voids or cavity walls• Connects to all rectangular component sockets• Available in two lengths: 1 m and ...

• Fits threaded hose connectors• Can go straight onto a spigot of a 90º bend with clips• Flame retardant white PVC PDF Catal...

• For recess mounting• Ribbed flanges for press fitting• Front edges bevelled all round• With 30 x 6 mm rectangular slots arra...