• For screw mounting• Height 100 mm• Stainless steelPDF Catalogue Page

- Vent height x width external dimensions; see table below- Connector depth: 145 mm- Stainless steelPDF Catalogue Page

• Rectangular spigot• UV stabilised material• Dimensions: - Front grille: W X H: 140 x 140 mm- Connecting spigot: W x H: 110 x 54 mm...

- The Compair? flow Star Wall vent system prevents warm room air escaping outside which compared with a traditional wall vent system, amounts to daily...

• White ducting kit with either white or brown external grille• Fixings included PDF Catalogue Page

• White ducting kit with either white or brown external grille• Fixings included PDF Catalogue Page

• In a rectangular configuration to assist fitting at awkward angles or levels.• Will connect to flat duct but must be securely attached w...

• For recess mounting• Press fitting• With flanged rim• Plastic PDF Catalogue Page

Wall vent with non-return flap and wind cowlRecommended for exposed locationsWill connect to round pipe, threaded hose coupler and round to flat conve...

• White flame retardant material• Please see Related Products PDF Catalogue Page

• Straight connector between two lengths of flat duct • Please see Related Products• Flame retardant white material PDF Catalogue...

• Also connects directly to cooker hood and extractor fan spigot• Flame retardant white material• N.B. System 4 = Ø 100 mm Syst...

• Connects two sections of flat duct at right angles - horizontal to horizontal• Flame retardant white material PDF Catalogue Page

• With straight notched 7.5 mm ribbed flanges on both sides for press fitting• Height 100 mm• Anodised aluminium PDF Catalogue Pa...

• Low resistance vent, ideal for axial bathroom fans for straight through wall fitting• Will fit the same components as cowled wall vent&#...

- Attractive, flexible solution to fill non-standard gaps aroundbuilt in appliances. Available in white or stainless steel effect finishes- Can be cut...

• For recess mounting• For press fitting and screw mounting• Front edges bevelled all round• With 20 x 3 mm oval slots arrange...

Over 199.35 cm2 ventilation areaFor recess mountingSuitable for wood thicknesses 10-20 mmTo install, the grille is simply inserted into the pre-cut ap...

• Can be concealed behind cornice, in ceiling voids or cavity walls• Connects to all rectangular component sockets• Available in two lengths: 1 m and ...