• Specially developed for Part F of Building Regulations Ventilation (England and Wales)• All vent/canopy combinations tested in accordance with BS EN...

• For use with System 5a (W204 x H60) • Grill is standard house brick size• UV stabilised material PDF Catalogue Page

Over 199.35 cm2 ventilation areaFor recess mountingSuitable for wood thicknesses 10-20 mmTo install, the grille is simply inserted into the pre-cut ap...

• Consists of:- 1x wall vent- 1x semi rigid hose, 400 mm• For use with systems 4, 5 and 6 extractor fans shown in Related Products• Hose clip must be ...

• Provides a neat finish where an aperture has been formed for a flat duct to exit through a wall• Outer dimensions:- System 4a version 15...

• With straight notched 7.5 mm ribbed flanges on both sides for press fitting• Height 100 mm• Anodised aluminium PDF Catalogue Pa...

• For recess mounting• Screw fixing• Long front edges bevelled• With 87 x 9 mm rectangular slots arranged in parallel• Complies with the requirements ...

- For recess mounting- Harpoon-type fixing for press fitting- Plastic- Ventilation area: 1.3 cm2?PDF Catalogue Page

Colour?:-White ?Ventilation?:-2.1 cm2Version :-?With Flanged RimInstallation:- For recess mounting & press fittingMaterial :PlasticPurchased in pa...

- For fitting into top of plinths- 367 mm length x 79 mm height x 21 mm depth- For 16 mm board thickness- PlasticPDF Catalogue Page

• Flame retardant white material PDF Catalogue Page

• Connects two sections of flat duct at right angles - horizontal to horizontal• Flame retardant white material PDF Catalogue Page

• Connects flat ducts to components with round configuration such as wall vents and and cooker hood spigots• Can be connected to flexhose ...

• Low resistance vent, ideal for axial bathroom fans for straight through wall fitting• Will fit the same components as cowled wall outlet...

• In a rectangular configuration to assist fitting at awkward angles or levels.• Will connect to flat duct but must be securely attached w...

• White flame retardant material• Please see Related Products PDF Catalogue Page

For mechanical ventilation purposes, also connects flat duct to cooker hood outletMale connector will slot inside the ducting                Area of a...

- For mounting with grub screws- Height 100 mm- Stainless steelPDF Catalogue Page

• To be connected outside of hose• Flame retardant white material• N.B. System 4 = Ø 100 mm System 5 = Ø 125 mm PDF Cat...