Colour?:-White ?Ventilation?:-2.1 cm2Version :-?With Flanged RimInstallation:- For recess mounting & press fittingMaterial :PlasticPurchased in pa...

- Vent height x width external dimensions; see table below- Connector depth: 145 mm- Stainless steelPDF Catalogue Page

• For recess mounting• Ribbed flanges for press fitting• Front edges bevelled all round• With 30 x 6 mm rectangular slots arra...

• White flame retardant material• Please see Related Products PDF Catalogue Page

- For mounting with grub screws- Height 100 mm- Stainless steelPDF Catalogue Page

• In a rectangular configuration to assist fitting at awkward angles or levels.• Will connect to flat duct but must be securely attached w...

• Provides a neat finish where an aperture has been formed for a flat duct to exit through a wall• Outer dimensions:- System 4a version 15...

• Simple worm drive fastener for Flexhose for use where threaded hose couplers cannot be fitted• WARNING: Do not overtighten on plastic sp...

• Specially developed for Part F of Building Regulations Ventilation (England and Wales)• All vent/canopy combinations tested in accordance with BS EN...

Colour :-White ?Version :- With Flanged rimVentilation 6.4 cm2Installation :- For recess mounting and press fittingMaterial :- PlasticSold in 10's? ? ...

• For recess mounting• Flanges are ribbed and drilled for press fit and screw mounting• Long front edges bevelled• With 30 x 6...

• Flame resistant properties of aluminium combined with the strength of polyester making this the ideal hose for cooker hood installations &#822...

• Consists of:- 1x wall vent- 1x semi rigid hose, 400 mm• For use with systems 4, 5 and 6 extractor fans shown in Related Products• Hose clip must be ...

- 80 mm length- White plasticPDF Catalogue Page

• For recess mounting• Screw fixing• Long front edges bevelled• With 87 x 9 mm rectangular slots arranged in parallel• Complies with the requirements ...

• For recess mounting• Press fitting• With flanged rim• Plastic PDF Catalogue Page

- For fitting into top of plinths- 367 mm length x 79 mm height x 21 mm depth- For 16 mm board thickness- PlasticPDF Catalogue Page

• White ducting kit with either white or brown external grille• Fixings included PDF Catalogue Page

- For recess mounting- Harpoon-type flanges for press fitting- Front edges bevelled all round- With 20 x 3 mm oval slots arranged in parallel- Anodise...