For use in blind corner kitchen cabinets and other specialised furniture applications⌀ 35 mm cupSoft-close compatibleDrilling pattern48/9 mmCup fixi...

For standard applications35 mm cupSoft-close compatibleDrilling pattern48/9 mmCup fixingFor screw fixingMountingMounting in drilled hole, Screw fixing...

Opening angle 110 degreeFor inset applications (where the door sits inside the frame)35 mm diameter cupFor door thickness up to 24 mm (for door thickn...

For standard applications? 35 mm cupOptimum gap dimensions up to 24 mm door thickness (for door thicknesses 24 mm and above, a trial fitting is recomm...

For hinging one half overlay door, side panel mounted 35mm diameter cupWith catchArea of application:-For hinging one half overlay doorVersion:-With e...

MaterialZinc alloyArea of applicationFor slide on systemsColour/finishnickelAdjustment facilityHeight adjustment Via screw ?2 mmEdge distance37 mmScre...

MaterialPlasticColour/finishGreyVersionwith positioning aidArea of applicationFor gently closing doorsInstallationFor screw fixingOrder referenceOrder...

For 30? angle applications? 35 mm cupUp to 24 mm (for door thicknesses 22 mm and above, a trial fitting is recommended)Colour/finishnickelMountingMoun...

The hinge is secured in the door or panel by tightening a tensioning screwUsing a chipboard or wood screw gives additional securityMountingRight and l...

- Non mortice, for medium duty applications- Normally for 15-16 mm door thicknesses- With fixed pin- Fixings not included - order screws separately, p...

With automatic closing spring, Drilling pattern 48/6 mm, screw fixing 35mm degree cup fixingAutomatic closing springApplication:-for standard applicat...

(Order hinge arm and cup separately)Particularly suitable for nursery or school furniture as small gap minimises the risk of finger entrapmentTested i...

For inset doors, side panel mounted, Screw fixing, 52/5.5Version:-With exposed axle, with springDrilling pattern:-52/5.5 mmCup fixing:-For screw fixin...

Hafele Metalla 310 Hinge is a concealed cup hinge designed for inset mounting on wooden doors with thicknesses ranging from 14 to 22 millimetres. Know...

Carlisle brass range of FTD Soft Close Hinges.This product is usually held in store (limited stocks), so can be collected or despatched same day as or...

MaterialSteelModelMetalla 310 SMColour/finishnickelAdjustment facilityHeight adjustment: Via slot ?2 mm, One part plate with ? 2 mm height adjustmentE...

• High quality hinge, tested to ANSI Grade 1 (100,000 cycles)• Shallow design, for thin doors or HPL panels• For corner or centre panel mounting, 6 mm...

For standard applications? 35 mm cupConvenient opening angle with excellent overlay and gap dimensions up to 24 mm door thicknessDrilling pattern42/11...

For use with Duomatic hinge, for opening doors without handlesInstallation:-Screw fixing with positioning aidModel:-DuomaticColour/finish:-GreyThickne...