FinishNickel platedMaterialSteelType of headRaised headDrivePZ cross slotThreadFully ThreadedPacking unitVersionGalvanizedOnline CatalogueTechnical da...

With countersunk head TS30Advantages:- Simple, time-saving fitting with permanent and tension free gap- High strength combined with a small drill-hole...

- Galvanized steel- Flat head, with combi-cross slotPDF Catalogue Page

VersionEasy to installSuitable for bricks, solid sand-lime brick, perforated sand-lime brick and lightweight concreteFire resistance class RF120/F120M...

- With shank and screwdriver slot- Galvanised steelPDF Catalogue Page

TypeHex NutsSystem of MeasurementMetricNumber in Pack10MaterialSteelGrade982Thread SizeM10

- Star drive with internal pin security screw- Requires matching driver for installation and removal, please see Don't Forget to Order- A2 stainless s...

Article detailsLength?(3/4 - 1 3/4") 19 - 45 mmThread?8-32 mmFunctionality8/32 = diameter/threads to the inchDue to segmentation, screw can be cut to ...

With zinc-plated wood screw for pozi bit size 2 or 3Includes white capsPre-assembledZinc AlloyZinc platedTL PVCu FIX 10x100 Min. hole depth 115 mmFram...

Timberfix 360 is a high performance multi purpose wood screw, drives faster with less torque and a reduced chance of splitting the wood.Carbon steelCo...

Screw Size#8Mandrel MaterialStainless SteelShapeRoundHoles Per Leaf1MaterialStainless SteelThread Size#8Head StyleFlatGauge8

Thread Dia.M6 Length28.00 mm Colour/finishZinc plated Material     Steel     Type of head    Flat head        Thread      Fully Threaded     

Frame anchor screw, for fastening into wood, stone and concreteFully threadedCountersunk head with T starWirox coated

- Suitable for plasterboard, fibreboard, chipboard, fibre cement board, lightweight wood-shaving board, hard fibreboard, hollow brick, hollow stone fl...

Washer from the Fabory Range (Heavy duty)Flat Steel -Self colourTo suit M6 ThreadPlainOuter diameter -15mmThickness -2mmBoxes of 100

- Flat head- Zinc-plated steel- *45 and 50 mm lengths with 35 mm thread lengthsPDF Catalogue Page

- Star drive with internal pin within the aperture- Requires matching driver for installation and removal, please see Don't Forget to Order- 304 stain...

- Countersunk with T-star head- Partly threaded- Special high/low thread increases the speed of insertion- Galvanised steel- For use with TS20 bitPDF ...