- With grooved plug- For 6mm diameter hole- Load carrying capacity 60 kg*- Plastic- *Load carrying capacity applies to 4 shelf supports bearing an eve...

- Load carrying capacity 500 kg per pair- Grey primed steelPDF Catalogue Page

CLEARANCE- discontinued lineSapphire/Newtech Hardware rangeVarious sizesSteel with white coatingWeight and spacing informationAll brackets should be s...

- Adjustable shelf support- For 7 - 41 mm shelf thickness- Special fixing method for fine adjustment of bracket height to ensure shelves are level- Sh...

- Adjustable shelf support- For 7 - 41 mm shelf thickness- Special fixing method for fine adjustment of bracket height to ensure shelves are level- Sh...

- Spoon shaped- For 7mm diameter hole or press fitting into socket (not included, order separately) - shown in Related Products Groups- Load carrying ...

MaterialMild Steel Area of application      Excellent for holding face frames on kitchen cabinetsInstallationScrew fixingPrices are lsited per 100 

Please note: Dark bronze studs will not match the mid brown strip colour exactlyHigh rigidity offered by ‘M’ shape, for library and shopfitting applic...

Contemporary decorative right angled shelf bracketsBlack or whiteTrellis pattern support between right angles plates6" or 8" (152/202mm)

Area of application:-For wooden shelvesColour/finish:-nickel platedInstallation;-For insert fittingFor drill hole diameter:-5.00 mmLength:-22.00 mmPin...

Please note: Dark bronze studs will not match the mid brown strip colour exactlyLow profile and fewer fixing holes-cost effectiveWide flanges for poss...

- Spoon shaped- For 5mm diameter hole- Load carrying capacity 80 kg*- SteelPDF Catalogue Page

- For 5mm diameter series-drilled holes at 32 mm intervals- For 19 mm shelf thickness- Plastic- Suitable plug in shelf support 283.63.510 - see Relate...

- Adjustable in 3 positions- Screw fixing- Load carrying capacity 200 kg per pair- SteelPDF Catalogue Page

CLEARANCE- discontinued lineSapphire/Newtech Hardware rangeVarious sizesSteel with white coatingWeight and spacing informationAll brackets should be s...

• Screw fixing• For 5-10 mm glass thickness• Use with plastic insert for 5-8 mm shelf thickness and use without plastic insert for 9-10 mm shelf thick...

Supporting pin with knurled section is installed in a Dia. 12 mm hole in the shelf, the pin may be exposed or concealed depending on the thickness of ...

CLEARANCE- discontinued lineSapphire/Newtech rangeVarious sizesReinforced with a right angled plate inside the bracketWeight and spacing informationAl...

Article detailsApplicationFor interlocking shelves in board materialLoad bearing capacity12.5 kg per piece, i.e. 50 kg load bearing capacity when usin...