• Plastic housing with zinc alloy tightening element• For wood thickness from 16 mm• No projecting parts due to countersunk rim on t...

- With M6 or M8 thread- Screws into sleeve shown in Related Products- Zinc-plated steel- For use with housing shown in Related Products?PDF Catalogue ...

- 5.4mm diameter drill hole- Galvanised steelPDF Catalogue Page

- With cover cap- For low loads, for small cabinets- PlasticPDF Catalogue Page

Comprises 1x 262.49.356 and 1x 262.49.360 (50 of each supplied)Easy pre-planningWide range of designs with different panel materials and other materia...

- With M6 thread for screwing into sleeves or dowels for installation in 8 mm or 10mm Diameter holes- Steel with red plastic sleevePDF Catalogue Page

- Collared- For use with 11 - 13 mm wide Modular plates shown in Related Products- For single sided installation in wood- With woodscrew thread for in...

- With special thread- For direct screw-in installation in 3 mm diameter holes or for press-fit installation in 5 mm diameter holes when used with dow...

NON-STOCKED PRODUCT - please allow 23 days for deliveryThe new development from the Minifix® system:Higher breaking torque provides considerably more ...

• For Minifix 15 housings without rim shown in Related Products• PlasticPDF Catalogue Page

- Galvanised steelPDF Catalogue Page

• 20 mm housing• Drilling depth 12.5 mm• Bolt pre-mounted, for installation in Ø 8 mm holes• For wood thicknesses from 15...

- With M4 thread and combination slot- For screwing into sleeves for single-sided constructions- SteelPDF Catalogue Page

• Zinc alloy housing• For wood thickness 34 mm• Finish: Bright• Dimensions vary according to wood thickness (please see illustration):- For wood thick...

• For semi-permanent fastenings• Burnished steel PDF Catalogue Page

- For mirrors 4 - 5 mm thick- For attaching mirrors to wood or walls- NylonPDF Catalogue Page

• With M6 or M8 thread• Screws into sleeve shown in Fixing Materials• Zinc-plated steel• For use with Maxifix housing shown in...

- For 8 mm Diameter hole- Screw with steel threaded pin and screwdriver slot- Milled sleeve without screwdriver slot- Galvanized steelPDF Catalogue Pa...

- Beechwood- Please note: The tolerance levels for these dowels are: length  0.2 mm, diameter: 0.1 mmVarious lengths and diameters shownPDF Catalogue ...