• For Maxifix housing• Plastic PDF Catalogue Page

- With cover cap- For low loads, for small cabinets- PlasticPDF Catalogue Page

• With special thread • Screws directly into Ø 5 mm holes• Zinc-plated steel• For use with Maxifix E housing shown in Rel...

- For 8 mm Diameter hole- Screw with steel threaded pin and screwdriver slot- Milled sleeve without screwdriver slot- Galvanized steelPDF Catalogue Pa...

- For direct, screw-in installation in 5 mm diameter holes- With special thread- SteelPDF Catalogue Page

- Galvanised steelPDF Catalogue Page

- For direct, screw-in installation in 5 mm diameter holes- With special thread- SteelPDF Catalogue Page

These are stocked items, and are usually available for same day collection- 5mm diameter drill hole- SteelPDF Catalogue Page

With pre-stressing facility, For wood thickness from 15 mmThe ideal gluing aid:Without using clamps or pressing devicesCompletely concealed/invisibleF...

- Double-ended hinged bolt for installation in 7mm diameter holes- For double-sided constructions- Steel- Can be used for any angle from 90 to 180 deg...

- The pre-glued milled out grooves are fitted with the biscuits pressed together- BeechPDF Catalogue Page

- Collared- For use with 11 - 13 mm wide Modular plates shown in Related Products- For single sided installation in wood- With woodscrew thread for in...

These are stocked items, and are usually available for same day collectionLength39-48mmColour/finishWhite  Area of application   Suitable for joining ...

With direct fixing thread for drilling diameter of 5 mmCan be used in System 32Steel / plasticPacked in 10'sUsed with Rastex Cam fitting - see in rela...

- 5 mm diameter drill hole- SteelPDF Catalogue Page

• Screw fixing• For furniture assembly• Brown or white plastic PDF Catalogue Page

Clamex P-14/10 MediusEasy installation without toolsPositive-fit anchoring – no gluing, no screwingCan be released and re-tightened often, suitable fo...

Eliminate the need for surface mounted worktop jointsThe nut is tightened onto the bolt pressing the caps against the walls of the 35 mm diameter hole...

- With special thread- For direct installation in 5 mm Diameter holes- Steel- Tighten with cross-slot screwdriver size 2 or flat bladed screwdriverPDF...