A simple method to secure units to the wall. Bridges any reasonable gap.- Regular: for 30-50 mm gaps- Extra large: for 45-80 mm gaps- Quick, simple an...

Comprises 1x 262.49.356 and 1x 262.49.360 (50 of each supplied)Easy pre-planningWide range of designs with different panel materials and other materia...

- For wood thickness from 16 or 19 mm- Drive: PZ2, PZ3 cross slot, flat blade or SW4 hexagon socket- Zinc alloyPDF Catalogue Page

- For diameter: 10 mm hole- With grooves for glue- Plastic- Outer diameter: 11 mmPDF Catalogue Page

- For diameter: 6.2 mm hole- With screwdriver slot- Bright steelPDF Catalogue Page

- For connecting fitting- PlasticPDF Catalogue Page

- Collared- For use with 11 - 13 mm wide Modular plates shown in Related Products- For single sided installation in wood- With woodscrew thread for in...

- For wood thicknesses from 13 mm- Drive: PZ2, cross slot, flat blade- Zinc alloyPDF Catalogue Page

- With M4 internal thread, for press-fit installation diameter: 8 mm?or diameter: 10 mm holes- Natural-coloured nylonPDF Catalogue Page

- With special thread- For direct installation in diameter: 5 mm holes- Steel- Tighten with cross-slot screwdriver size 2 or flat bladed screwdriverPD...

• For screwing into sleeves and dowels• Sleeves and dowels to suit are shown in Fixing Materials• Steel• Can be used for any a...

- For mirrors 4 - 5 mm thick- For attaching mirrors to wood or walls- NylonPDF Catalogue Page

Thread length11 mmFor drill hole diameter5 mmArea of applicationFor 5 mm diameter pre-drilled holesMaterialPlastic, SteelDrivePZ2 cross slotInstallati...

• Zinc alloy housing with zinc alloy tightening element• For wood thickness from 16 and 19 mm• Dimensions vary according to wood thi...

- With cover cap- For low loads, for small cabinets- PlasticPDF Catalogue Page

Article detailsFor wood thicknessFrom 15 mm mmThread length L11.5 mmApplicationFor one-sided installation and for industry, joiners and cabinet makers...

- For direct, screw-in installation in 5mm?diameter holes- With special thread- Steel- Tighten with a cross-slot screwdriver size 2 onlyPDF Catalogue ...

- Galvanised steelPDF Catalogue Page

ApplicationFor furniture assemblyInstallationScrew fixingMaterialSteelFinishBright zinc platedOrder referenceOrder Hospa diameter: 4.0 mm countersunk ...