Choose a category

 

 

Catalogues

 

 

Loox LED Lighting Systems

 

Bathex Fittings For The Disabled

 

Green Eco Friendly

Star rectangular wall vent system

Star rectangular wall vent system
Loading image...

Star rectangular wall vent system
The Compair flow Star Wall vent system prevents warm room air escaping outside which compared with a traditional wall vent system, amounts to daily savings of both energy and cost. This is achieved because the vent cover only remains open when there is air pressure. When there is no air pressure the cover remains in place.
Advantages:
- Lowest pressure loss of all common wall conducts
- Maximum flow rate of vapour hood
- Low noise generaton by vapour hood
- Optimum heat insulation
- No back pressure shutter required
- No rattling in case of gusts of wind
- Good seal with the vapour hood switched off
- Complies with the requirements of the blower door test
Comprises
- Round external stainless steel cover: 197 mm (125 system) or 220 mm (150 system)
- Duct tube, adjustable length; see below
- Plate
System: 125
- Plate (H x W): 155 x 155
- Connector depth: 80 mm
- Min. pressure: 100 Pa
System: 150
- Plate (H x W): 190 x 180
- Connector depth: 80 mm
- Min. pressure: 150 Pa

 
 
» View illustration
 

ALL PRICES SHOWN ARE INCLUSIVE OF VAT

System: 125;
Tube (H x W): 82 x 174 mm;
Installed depth: 314-500 mm

Code: 500.97.163
view PDF Product Information Sheet
£232.38
Pack Qty 1 Set
In stock
Check
Overnight stock level - 9 in stock*
 
 

System: 150;
Tube (H x W): 94 x 227 mm;
Installed depth: 314-500 mm

Code: 500.97.561
view PDF Product Information Sheet
£232.38
Pack Qty 1 Set
In stock
Check
Overnight stock level - 13 in stock*
 
 

* Please note that our stock figures are updated once every 24 hours and should be used as a guide only.

Whilst we do keep some stock at our warehouse, much of it is kept at our central warehouse in Rugby.
PLEASE CONTACT US TO CHECK BEFORE VISITING.

Description

Star rectangular wall vent system
The Compair flow Star Wall vent system prevents warm room air escaping outside which compared with a traditional wall vent system, amounts to daily savings of both energy and cost. This is achieved because the vent cover only remains open when there is air pressure. When there is no air pressure the cover remains in place.
Advantages:
- Lowest pressure loss of all common wall conducts
- Maximum flow rate of vapour hood
- Low noise generaton by vapour hood
- Optimum heat insulation
- No back pressure shutter required
- No rattling in case of gusts of wind
- Good seal with the vapour hood switched off
- Complies with the requirements of the blower door test
Comprises
- Round external stainless steel cover: 197 mm (125 system) or 220 mm (150 system)
- Duct tube, adjustable length; see below
- Plate
System: 125
- Plate (H x W): 155 x 155
- Connector depth: 80 mm
- Min. pressure: 100 Pa
System: 150
- Plate (H x W): 190 x 180
- Connector depth: 80 mm
- Min. pressure: 150 Pa

Customer reviews

This product does not currently have any reviews.

Be the first to submit a review for the Star rectangular wall vent system.

12345
Site by Moonshine Internet