Choose a category

 

Catalogues

 

 

Loox LED Lighting Systems

 

Bathex Fittings For The Disabled

 

Green Eco Friendly

Electro-mechanical hold-open overhead door closer

Electro-mechanical hold-open overhead door closer
Loading image...
Electro-mechanical hold-open overhead door closerElectro-mechanical hold-open overhead door closer
 

Electro-mechanical hold-open overhead door closer
• Specification:
- Surface mounted eccentric rack and pinion door closer with electro-mechanical guide rail arm for doors up to 1400 mm, with adjustable closing force, optical strength indicator, back check, hydraulic latch action and eccentric pinion
- All adjustments on the front of the mechanism
- When voltage applied to closer - door held open
- No voltage applied or switched off - door closes automatically
- The door can be closed manually at any time regardless of whether or not the voltage is applied
• Standard features:
- Eccentric pinion system for easier opening
- Non-projecting electro-mechanical guide rail arm
- Closing force adjustable from front (size range EN 2-6)
- Optical closing force indicator
- Adjustable backcheck
- Valvue adjustable latching speed
- All adjustments at front of closer
• Electrical data:
- Operating voltage 24 V DC +- 10%
- Connecting load 100mA
- Max. permissible residual ripple 20%
- Rating 100%
- Enclosure rating IP43
- For interior use only
- A suitable switch should be installed for test purposes
• Connection:
- The power supply cable (max. cross section 0.8mm2) from the fire detection control unit (24V DC) is connected to terminal ‘M’ in the guide rail
• Models
- Standard (Fig 1)
• Certification
- Tested and approved to BS EN 1155:1997
- Tested to conform with CE requirements
- Certifire approved; certificate no. CF145 120 mins timber
• Material
- Aluminium body and guide rail. Mild steel arm
• A door stop should always be used for non back checked doors, and where practical for back checked doors, and at least 66% of the door width away from the hinge.

 

Please note the manufacturer is discontinuing this product once stock has reached nil - it may not be possible to return this item (faults or damage notwithstanding).

*Quantity discounts are available on this item. Please see below.

 
» View illustration
 

ALL PRICES SHOWN ARE INCLUSIVE OF VAT

Ts5000-e Electro Oh Clr En 2-6
Click to view Quantity discounts

Code: 931.10.540
view PDF Product Information Sheet
£561.66
Pack Qty 1 Piece
Discontinued
  
Overnight stock level - 0 in stock*
 

Buy 2 x Pack Qty 1 Piece for £998.50 (£499.25 each, saving you £124.82)
Buy 3 x Pack Qty 1 Piece for £1,310.53 (£436.84 each, saving you £374.45)

 

Ts5000-e Electro Oh Cls En 2-6
Click to view Quantity discounts

Code: 931.10.541
view PDF Product Information Sheet
£561.66
Pack Qty 1 Piece
Discontinued
  
Overnight stock level - 0 in stock*
 

Buy 2 x Pack Qty 1 Piece for £998.50 (£499.25 each, saving you £124.82)
Buy 3 x Pack Qty 1 Piece for £1,310.53 (£436.84 each, saving you £374.45)

 

* Please note that our stock figures are updated once every 24 hours and should be used as a guide only.

Whilst we do keep some stock at our warehouse, much of it is kept at our central warehouse in Rugby.
PLEASE CONTACT US TO CHECK BEFORE VISITING.

Description

Electro-mechanical hold-open overhead door closer
• Specification:
- Surface mounted eccentric rack and pinion door closer with electro-mechanical guide rail arm for doors up to 1400 mm, with adjustable closing force, optical strength indicator, back check, hydraulic latch action and eccentric pinion
- All adjustments on the front of the mechanism
- When voltage applied to closer - door held open
- No voltage applied or switched off - door closes automatically
- The door can be closed manually at any time regardless of whether or not the voltage is applied
• Standard features:
- Eccentric pinion system for easier opening
- Non-projecting electro-mechanical guide rail arm
- Closing force adjustable from front (size range EN 2-6)
- Optical closing force indicator
- Adjustable backcheck
- Valvue adjustable latching speed
- All adjustments at front of closer
• Electrical data:
- Operating voltage 24 V DC +- 10%
- Connecting load 100mA
- Max. permissible residual ripple 20%
- Rating 100%
- Enclosure rating IP43
- For interior use only
- A suitable switch should be installed for test purposes
• Connection:
- The power supply cable (max. cross section 0.8mm2) from the fire detection control unit (24V DC) is connected to terminal ‘M’ in the guide rail
• Models
- Standard (Fig 1)
• Certification
- Tested and approved to BS EN 1155:1997
- Tested to conform with CE requirements
- Certifire approved; certificate no. CF145 120 mins timber
• Material
- Aluminium body and guide rail. Mild steel arm
• A door stop should always be used for non back checked doors, and where practical for back checked doors, and at least 66% of the door width away from the hinge.

Customer reviews

This product does not currently have any reviews.

Be the first to submit a review for the Electro-mechanical hold-open overhead door closer.

12345
Site by Moonshine Internet