Choose a category

 

Catalogues

 

 

Loox LED Lighting Systems

 

Bathex Fittings For The Disabled

 

Green Eco Friendly

Keyless In biometric fingerprint reader

Keyless In biometric fingerprint reader
Loading image...

Keyless In biometric fingerprint reader
• Insert module for flush mounted door stations, cover frame to be ordered separately
• For installation in flush mounted wall box, shown in Don't Forget to Order
• Power supply: Use Cat. No. 912.08.900 shown in Don't Forget to Order
• Connections: 2 power supply connectors. Connector strip for system bus of Gira door communications system
• Consists of: Keyless fingerprint reader insert
• Features:
- As stand alone device or in combination with Gira door communication system, enables convenient door opening for authorised person
- Integration in the GIRA door communication system without additional control components
- Access control system based on biometric characteristics of the human finger using new generation surface-scan technology - uses high frequency scanning of the deepest layer of skin, giving high detection rate and security agianst tampering
- Up to 100 fingers can be managed by the fingerprint reader, no PC or software required
- Can detect signs of life in the finger
- Reliable detection of fingers which for example were slightly injured during gardening (only the top layer of skin was injured)
- The digitised data of the fingerprint is encrypted and can only be detected and processed further by the Gira fingerprint evaluation unit, thereby preventing unauthorised use
- Fingerprint sensors include special software, which constantly check and saves finger information, especially important for children’s fingers which change over time and whose data must therefore be constantly updated
Note: Children’s fingers generally can first be reliably detected from 6 years of age
- Finger can be detected if placed at an angle of up to 15× from the zero axis
- Fast reaction time from placing finger to release:
up to 30 stored fingers approx. 1 second
up to 100 stored fingers approx. 3 seconds
- Night design of fingerprint surface shows where finger must be placed, insert is backlit by white LED
- Two-colour LED display to show status during programming and operation
- Master PIN number provided on included sealed security card if administrator finger is no longer available
- Warning tone in case of unauthorised removal of fingerprint top unit
- Two integrated 2-way switch relays can be assigned two different fingers e.g. thumb: control of door opening, index finger: switching outside light
• Impact-resistant plastic

 

*Quantity discounts are available on this item. Please see below.

 
 

ALL PRICES SHOWN ARE INCLUSIVE OF VAT

Keyless In Biometric Fingerpri
Click to view Quantity discounts

Code: 912.08.427
view PDF Product Information Sheet
£807.65
Pack Qty 1 Piece
Out of stock
  
Overnight stock level - 0 in stock*
 

Buy 2 x Pack Qty 1 Piece for £1,413.39 (£706.70 each, saving you £201.91)

 

Keyless In Biometric Fingerpri
Click to view Quantity discounts

Code: 912.08.429
view PDF Product Information Sheet
£818.98
Pack Qty 1 Piece
Out of stock
  
Overnight stock level - 0 in stock*
 

Buy 2 x Pack Qty 1 Piece for £1,433.21 (£716.61 each, saving you £204.75)

 

* Please note that our stock figures are updated once every 24 hours and should be used as a guide only.

Whilst we do keep some stock at our warehouse, much of it is kept at our central warehouse in Rugby.
PLEASE CONTACT US TO CHECK BEFORE VISITING.

Description

Keyless In biometric fingerprint reader
• Insert module for flush mounted door stations, cover frame to be ordered separately
• For installation in flush mounted wall box, shown in Don't Forget to Order
• Power supply: Use Cat. No. 912.08.900 shown in Don't Forget to Order
• Connections: 2 power supply connectors. Connector strip for system bus of Gira door communications system
• Consists of: Keyless fingerprint reader insert
• Features:
- As stand alone device or in combination with Gira door communication system, enables convenient door opening for authorised person
- Integration in the GIRA door communication system without additional control components
- Access control system based on biometric characteristics of the human finger using new generation surface-scan technology - uses high frequency scanning of the deepest layer of skin, giving high detection rate and security agianst tampering
- Up to 100 fingers can be managed by the fingerprint reader, no PC or software required
- Can detect signs of life in the finger
- Reliable detection of fingers which for example were slightly injured during gardening (only the top layer of skin was injured)
- The digitised data of the fingerprint is encrypted and can only be detected and processed further by the Gira fingerprint evaluation unit, thereby preventing unauthorised use
- Fingerprint sensors include special software, which constantly check and saves finger information, especially important for children’s fingers which change over time and whose data must therefore be constantly updated
Note: Children’s fingers generally can first be reliably detected from 6 years of age
- Finger can be detected if placed at an angle of up to 15× from the zero axis
- Fast reaction time from placing finger to release:
up to 30 stored fingers approx. 1 second
up to 100 stored fingers approx. 3 seconds
- Night design of fingerprint surface shows where finger must be placed, insert is backlit by white LED
- Two-colour LED display to show status during programming and operation
- Master PIN number provided on included sealed security card if administrator finger is no longer available
- Warning tone in case of unauthorised removal of fingerprint top unit
- Two integrated 2-way switch relays can be assigned two different fingers e.g. thumb: control of door opening, index finger: switching outside light
• Impact-resistant plastic

Customer reviews

This product does not currently have any reviews.

Be the first to submit a review for the Keyless In biometric fingerprint reader.

12345
Site by Moonshine Internet