Choose a category

 

Catalogues

 

 

Loox LED Lighting Systems

 

Bathex Fittings For The Disabled

 

Green Eco Friendly

MOT wall terminal set

MOT wall terminal set
Loading image...

MOT wall terminal set
• Mains operated, intelligent wall terminal for various application and design requirements
• For outdoor and indoor use: Lift control, locker systems, equipment and furniture, lighting
• Comprises:
- 1x Wall reader module with frame
- 1x Electronic control unit in housing for installation in mounting case, shown in Related Products
• Touchless activation of functions via Dialock key:
- Selective control of up to 4 electrical devices - can be extended to max. 128 output ports in combination with OE output extender
- Red/green LEDs for indication of the activation status
- For service personnel: Indication of programming status
• Infrared interface in wall reader for programming
• Electronic control unit with integrated real-time clock for programming time restricted locking authorisations (setting of time zones), logging of all processes, with 4 input ports for analysing input signals (e.g. reed contact for door monitoring), with serial interface RS 232 for optional networking via online sets
• Optional extension of functions by means of additional macro software
Wall reader module:
- IP 65 rated
- Ambient temperature (operation): –20 – +70 °C
- Power supply: Via electronic control unit
- Connection: Screw terminals 1.0 mm2
- Plastic anthracite/silver coloured housing
Electronic control unit:
- IP 20 rated
- Ambient temperature (operation): –20 – +70 °C Power supply: 9–40V DC or 8–36V AC Current input > 300 mA
- Contact rating of relays:
Voltage = 10 years
- Relative humidity: 0 – 95 % (non-condensing)
- Connection: Screw terminals 2.5 mm2
- Hat rail installation M36 rail technology: 6 joint units
- Light grey plastic housing
Technical information:
- Connection between wall reader and electronic control unit with four core installation cable in compliance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 50 m (Legic®) or max. length 35 m (Tag-itTM-ISO), (please contact Dialock specialist for other lengths)
- Installation of wall readers in flush mounted box with 2 device fastening screws with 15 mm distance (60 mm in compliance with DIN)
- Make sure the fastening points on the flush box are horizontal
- Min. distance between 2 wall readers 250 mm
- The installation of the wall reader in metal surroundings must be planned
Note: System needs to be set up using Dialock MOT software - please contact us for more details

 

Please note the manufacturer is discontinuing this product once stock has reached nil - it may not be possible to return this item (faults or damage notwithstanding).

Code: 917.41.142

Product Information Sheetview PDF

Buying this product will earn 5250 Loyalty Points.
Collected points can be redeemed against future purchases!
More info. »

ALL PRICES SHOWN ARE INCLUSIVE OF VAT

Our price £524.96*

Pack Qty 1 Set

Discontinued

Check stock availability
Overnight stock level - 0 in stock*


* Please note that our stock figures are updated once every 24 hours and should be used as a guide only.

Whilst we do keep some stock at our warehouse, much of it is kept at our central warehouse in Rugby.
PLEASE CONTACT US TO CHECK BEFORE VISITING.

 
» View illustration
 

Description

MOT wall terminal set
• Mains operated, intelligent wall terminal for various application and design requirements
• For outdoor and indoor use: Lift control, locker systems, equipment and furniture, lighting
• Comprises:
- 1x Wall reader module with frame
- 1x Electronic control unit in housing for installation in mounting case, shown in Related Products
• Touchless activation of functions via Dialock key:
- Selective control of up to 4 electrical devices - can be extended to max. 128 output ports in combination with OE output extender
- Red/green LEDs for indication of the activation status
- For service personnel: Indication of programming status
• Infrared interface in wall reader for programming
• Electronic control unit with integrated real-time clock for programming time restricted locking authorisations (setting of time zones), logging of all processes, with 4 input ports for analysing input signals (e.g. reed contact for door monitoring), with serial interface RS 232 for optional networking via online sets
• Optional extension of functions by means of additional macro software
Wall reader module:
- IP 65 rated
- Ambient temperature (operation): –20 – +70 °C
- Power supply: Via electronic control unit
- Connection: Screw terminals 1.0 mm2
- Plastic anthracite/silver coloured housing
Electronic control unit:
- IP 20 rated
- Ambient temperature (operation): –20 – +70 °C Power supply: 9–40V DC or 8–36V AC Current input > 300 mA
- Contact rating of relays:
Voltage = 10 years
- Relative humidity: 0 – 95 % (non-condensing)
- Connection: Screw terminals 2.5 mm2
- Hat rail installation M36 rail technology: 6 joint units
- Light grey plastic housing
Technical information:
- Connection between wall reader and electronic control unit with four core installation cable in compliance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 50 m (Legic®) or max. length 35 m (Tag-itTM-ISO), (please contact Dialock specialist for other lengths)
- Installation of wall readers in flush mounted box with 2 device fastening screws with 15 mm distance (60 mm in compliance with DIN)
- Make sure the fastening points on the flush box are horizontal
- Min. distance between 2 wall readers 250 mm
- The installation of the wall reader in metal surroundings must be planned
Note: System needs to be set up using Dialock MOT software - please contact us for more details

Customer reviews

This product does not currently have any reviews.

Be the first to submit a review for the MOT wall terminal set.

12345
facebook link
twitter link
Site by Moonshine Internet